LED Labs

Páska PRO 3Y 24V 2640 LED COB Free cut 6W NW RA90, 5m

Name: Páska PRO 3Y 24V 2640 LED COB Free cut 6W NW RA90, 5m
Brand: LED Labs

LED tape has cutting points along its entire length, so it can be cut anywhere. Free Cut LED strip can be installed in a profile of any length. The density of the LEDs ensures uniform light even if a single diode is damaged during cutting. The 3Y series of LED tapes are tapes with an increased warranty period. For IP65 and IP65HS tapes it is 3 years, for IP20 tapes it is up to 5 years warranty! In addition, the 3Y series tapes are characterized by lower voltage drops due to the 3oz copper PCB backing used. The tapes have double-sided Blue Tape mounting tape. A uniform line of light in your home! Thanks to the increased number of LEDs, it is possible to achieve a uniform line of light even when using a low D, Z, or SOLIS type aluminum profile. COB LEDs, compared to older technologies, emit a uniform line of light. And all this while maintaining low power consumption. Neutral white color Neutral color is the closest to sunlight. It will find use wherever our eyes are forced to strain: at work, in the office in the home premises. It is the most versatile light color. IP20 LED strip IP20 LED strips are the most commonly used LED strips. Wherever there is no exposure to moisture and water, they are the choice to guarantee a long life. The lack of a cover to reinforce waterproofing affects the better dissipation of heat from the LED strip, which translates into the life expectancy of the LED strip. LED strip in IP20 waterproof strips can perfectly cope with dust and dry dirt thanks to the protective layer coating the LEDs. LED strips 24V - lower voltage drops Choosing 24V LED strips is a solution increasingly chosen by professionals. Thanks to the use of higher voltage, the designed LED lighting system allows you to lay longer sections of LED tape without the risk of voltage drops at the ends of the tape sections. At a higher voltage, less current flows through the tape, thanks to which 24V LED tapes also allow the use of smaller wires, which can be helpful when designing installations. This allows the wires to be more easily hidden. LED 24V strips are increasingly popular in the market. See the colors in their natural shades CRI indicates how the colors of the illuminated object are rendered. The higher the value, the more natural the objects look. Naturally, that is, as if they were lit by daylight. The use of tape with a CRI of more than 90 allows to reflect the true color of objects in the room where the LED tape was used. Requires the installation of a power supply LED strips are powered by low, safe voltage. To connect them you need a power supply. The choice of power supply depends on the parameters of the LED strip. 24V tapes need a power supply with 24V output voltage. Another important aspect is adequate power. The power of the power supply must be adapted to the power and length of the tape to be mounted. If a section of LED strip is 5m long, the power of the LED strip should be multiplied times 5. It's worth adding a 10% power reserve. We offer furniture, hermetic or slim power supplies: their choice depends on the place of installation.