Dynacord

Dynacord IX30:8 Networked DSP Power Amplifier, 8 x 375W, Dante, 8 Mic and Line Inputs, 1U

Name: Dynacord IX30:8 Networked DSP Power Amplifier, 8 x 375W, Dante, 8 Mic and Line Inputs, 1U
Brand: Dynacord

The Dynacord IX30:8 is a 8-channel networked DSP amplifier in 1U with 3000W of total power, rated at 8x 375W into any load from 2 ohms to 100V lines. Built-in Dante, a 16 x 16 DSP matrix with FIR-Drive and 8 mic/line inputs let it act as amplifier and processor in one. It suits sports venues, houses of worship, performance spaces, hotels and conference venues. 8x 375WAll load types8 x 8Dante8Mic/line inputs1URack height SoftwareConfiguration and control are through Dynacord SONICUE Sound System Software; the amplifier can also act as a SONICUE control server for wall panels, TPC-1 touch panels, iOS and Windows devices. FeaturesEight channels, 8x 375W with all channels driven into 2, 2.7, 4 or 8 ohms, 70V or 100VpowerTANK sharing: a single channel can deliver up to 1000W into 8 ohms or 100V; channel pairs bridge to 750W into 4 ohmsDrives low-impedance or 70V/100V loads without transformers8 x 8 Dante at 48 or 96 kHz with glitch-free redundancy (primary/secondary) or RSTP8 mic/line inputs with 48V phantom power, usable as Dante break-in points96 kHz DSP with 16 x 16 matrix mixer, EQ, dynamics, FX and FIR-Drive speaker processingPilot-tone detection on all inputs and pilot-tone generation up to 30 kHzghostPOWER: PoE on the primary port keeps DSP, Dante and mic/line inputs running without mainsTaskEngine for logic, scheduling and third-party control; AES70/OCA remote control3 GPIO ports and a ready/fault relay SpecificationsOutput power, all channels driven2 ohm, 2.7 ohm, 4 ohm, 8 ohm, 70V, 100V: 375W eachMaximum per channel8 ohm: 1000W, 100V: 1000W, 70V: 750WBridged output4 ohm: 750WTotal rated output3000WMaximum output voltage / current per channel145 Vpk / 33 ApkVoltage gain32 dB, adjustable 20 to 44 dBFrequency response20 Hz to 20 kHz (±1 dB)THD+NShow more

from £3,455.00

1 offer

See all offers