Dynacord

Dynacord IX60:8 Networked DSP Power Amplifier, 8 x 600W, Dante, 8 Mic and Line Inputs, 1U

Name: Dynacord IX60:8 Networked DSP Power Amplifier, 8 x 600W, Dante, 8 Mic and Line Inputs, 1U
Brand: Dynacord

The Dynacord IX60:8 is a 8-channel networked DSP amplifier in 1U with 6000W of total power, rated at 8x 600W into 4 ohms or 8x 750W on 70V/100V lines. Built-in Dante, a 16 x 16 DSP matrix with FIR-Drive and 8 mic/line inputs let it act as amplifier and processor in one. It suits sports venues, houses of worship, performance spaces, hotels and conference venues. 8x 600WInto 4 ohms8 x 8Dante8Mic/line inputs1URack height SoftwareConfiguration and control are through Dynacord SONICUE Sound System Software; the amplifier can also act as a SONICUE control server for wall panels, TPC-1 touch panels, iOS and Windows devices. FeaturesEight channels, 8x 600W into 4 ohms or 8x 750W into 100V with all channels drivenpowerTANK power sharing across channels; channel pairs bridge to 1500W into 4 ohmsDrives low-impedance or 70V/100V loads without transformers8 x 8 Dante at 48 or 96 kHz with glitch-free redundancy (primary/secondary) or RSTP8 mic/line inputs with 48V phantom power, usable as Dante break-in points96 kHz DSP with 16 x 16 matrix mixer, EQ, dynamics, FX and FIR-Drive speaker processingPilot-tone detection on all inputs and pilot-tone generation up to 30 kHzghostPOWER: PoE on the primary port keeps DSP, Dante and mic/line inputs running without mainsTaskEngine for logic, scheduling and third-party control; AES70/OCA remote control3 GPIO ports and a ready/fault relay SpecificationsOutput power, all channels driven4 ohm: 600W, 70V: 750W, 100V: 750WBridged output4 ohm: 1500WTotal rated output6000WMaximum output voltage / current per channel145 Vpk / 33 ApkVoltage gain32 dB, adjustable 20 to 44 dBFrequency response20 Hz to 20 kHz (±1 dB)THD+NShow more

from £3,887.00

1 offer

See all offers