Lumines

TOUCH SWITCH with DELAY OFF function with dimmer.

Name: TOUCH SWITCH with DELAY OFF function with dimmer.
Brand: Lumines

The controller has a delay off function that is responsible for gradually dimming the lighting when it is turned off. By using the delay off function, we can freely leave the room being illuminated. TOUCH switch with PWM 12/24V DC dimmer designed for single-color LED strips.. The switch works well for installation in LUMINES aluminum profile with internal dimensions of more than 10 mm. Can be mounted in the profile behind the lampshade, due to the characteristics of switching by touching at the site of the plate. The place where the tin is located is illuminated by a single LED. The switch is a very aesthetic and practical solution, e.g.. Using LED lighting above the kitchen countertop. Pressing the lampshade where the tin is present turns the lighting on/off. Holding the switch for more than 2 seconds will cause the indicator light to blink and enter light intensity adjustment mode. The tin under the shade must be higher than the distance between the sticking part of the LED tape and the shade. Installation of the Touch driver in the LUMINES A profile Version touch Voltage 12V / 24V Max. Output current5A / 3A Power 60W / 72W Dimming function Yes Dimming time (for 100% light intensity) 20 s +/- 1s Dimming time (for 50% light intensity) 10 - 11 s Waterproof IP20 Dimensions 55x10mmZobrazit více

od 272,75 Kč

1 nabídka

Zobrazit nabídky