Crown

Crown DCi 2x600 DriveCore Install Amplifier, 2 x 600W, 4 or 8 Ohm, 70V or 100V Line, 2U

Name: Crown DCi 2x600 DriveCore Install Amplifier, 2 x 600W, 4 or 8 Ohm, 70V or 100V Line, 2U
Brand: Crown

The Crown DCi 2|600 is a two-channel DriveCore Install amplifier rated at 2x 600W into 4 or 8 ohms, or on 70V or 100V lines without output transformers. Each channel is set to low or high impedance independently, and channel pairs bridge for higher power. It suits background and foreground music systems in venues, hotels, retail, education and houses of worship. 2x 600W4/8 ohm, 70V, 100V1200WBridged, 8 ohmsPFCUniversal supply2URack height FeaturesTwo channels, 2x 600W into 4 or 8 ohms, 70V or 100VDirect drive of 70V and 100V lines with no step-up transformerLow or high impedance selectable per channelBridgeable channel pair, including in 100V mode, for 1200WRemote on/off interface for control system integrationVariable-speed front-to-back fan coolingPower factor corrected universal power supply, 100 to 240 V SpecificationsOutput power, all channels driven2 ohm: 300W, 4 ohm: 600W, 8 ohm: 600W, 16 ohm: 300W, 70V: 600W, 100V: 600WBridged output4 ohm: 600W, 8 ohm: 1200W, 16 ohm: 1200W, high impedance: 1200WBridged load range4 to 16 ohms; 140V or 200V linesFrequency response20 Hz to 20 kHz (±0.25 dB, 8 ohms)THD0.35% at full rated powerDamping factor>1000 (20 to 100 Hz)CoolingVariable-speed fans, front to backFan noise45 dBA SPL at 1 m maximumMains100 to 240 V AC, 50/60 Hz, 15A IECDimensions (W x H x D)483 x 89 x 362 mm, 2UWeight8.53 kgShow more

from £1,590.00

1 offer

See all offers