Crown

Crown DCi 8x300N DriveCore Install Network Amplifier, 8 x 300W, 70V or 100V, DSP, BLU link, 2U

Name: Crown DCi 8x300N DriveCore Install Network Amplifier, 8 x 300W, 70V or 100V, DSP, BLU link, 2U
Brand: Crown

The Crown DCi 8|300N is an eight-channel networked DriveCore Install amplifier rated at 8x 300W into 4 or 8 ohms, or on 70V or 100V lines without output transformers. It adds BLU link digital audio, HiQnet network control and onboard DSP, and is EN 54-16 certified as part of a voice alarm system. It suits multi-zone installs in hotels, large venues, stadiums, campuses and transport buildings. 8x 300W4/8 ohm, 70V, 100VBLU linkDigital audioEN 54-16Voice alarm2URack height SoftwareNetwork monitoring and DSP set-up use HARMAN Audio Architect software over HiQnet. FeaturesEight channels, 8x 300W into 4 or 8 ohms, 70V or 100VDirect drive of 70V and 100V lines, selectable per channelBridgeable channel pairs for 600WBLU link digital audio plus balanced analogue inputs, with automatic failover to a backup inputDSP: LevelMAX limiters, input and output EQ, crossover, delay, matrix mixer and speaker line monitoringHiQnet network monitoring and control over TCP/IPProgrammable GPIO for volume, preset recall and fault reportingEN 54-16 compliant when used in a certified voice alarm systemPower factor corrected universal power supply SpecificationsOutput power, all channels driven2 ohm: 150W, 4 ohm: 300W, 8 ohm: 300W, 16 ohm: 150W, 70V: 300W, 100V: 300WBridged output4 ohm: 300W, 8 ohm: 600W, 16 ohm: 600W, high impedance: 600WBridged load range4 to 16 ohms; 140V or 200V linesFrequency response20 Hz to 20 kHz (±0.25 dB, 8 ohms)THD0.35% at full rated powerDamping factor>1000 (20 to 100 Hz)CoolingVariable-speed fans, front to backFan noise47 dBA SPL at 1 m maximumMains100 to 240 V AC, 50/60 Hz, 15A IECDimensions (W x H x D)483 x 89 x 362 mm, 2UWeight10.66 kgShow more

from £3,593.00

1 offer

See all offers