Dynacord

Dynacord C1800FDi Install DSP Power Amplifier, 2 x 850W at 4 Ohm, Class AB, 70V Line, FIR Drive, 2U

Name: Dynacord C1800FDi Install DSP Power Amplifier, 2 x 850W at 4 Ohm, Class AB, 70V Line, FIR Drive, 2U
Brand: Dynacord

The Dynacord C1800FDi is a two-channel Class AB DSP power amplifier for permanent installation, rated at 2x 850W into 4 ohms and stable down to 2 ohms. It can also drive 70V lines directly on both channels, or a 100V line in bridged mode. It has Euroblock connections, onboard FIR-Drive speaker processing and remote power and preset control, and suits bars, restaurants, houses of worship, sports halls and performing arts venues. 2x 850WInto 4 ohms2x 1400WInto 2 ohms70V / 100VDirect drive2URack height FeaturesTwo channels, 2x 850W into 4 ohms, 2x 1400W into 2 ohmsBridged output of 2800W into 4 ohmsDirect drive of 70V lines on both channels (2x 1250W), or a 100V line in bridged mode (1x 1250W)Euroblock input and output connections for fixed installationOnboard DSP per channel: PEQ, 31-band GEQ, limiters and output delay, with FIR-Drive filtersRemote power on via switch with selectable delay, inputs for preset selection and floating relay contacts for protect statusPower-saving standby modeProtection against over-temperature, DC, HF, back-EMF and peak current, plus inrush limiting and turn-on delayFront-to-rear cooling with three-stage fans SpecificationsOutput power, both channels driven2 ohm: 1400W, 2.6 ohm: 1200W, 4 ohm: 850W, 8 ohm: 450WOutput power, single channel2 ohm: 1600W, 2.6 ohm: 1300W, 4 ohm: 950W, 8 ohm: 480WBridged output4 ohm: 2800W, 8 ohm: 1700WHigh-impedance operation70V: 2x 1250W (-1.5 dB); 100V bridged: 1x 1250W (-1.5 dB)Output stageClass ABFrequency response10 Hz to 21 kHz (±1 dB)Signal-to-noise ratio>105 dB (A-weighted)THDShow more

from £1,079.00

1 offer

See all offers