Dynacord

Dynacord IX60:4 Networked DSP Power Amplifier, 4 x 1500W, Dante, 4 Mic and Line Inputs, 1U

Name: Dynacord IX60:4 Networked DSP Power Amplifier, 4 x 1500W, Dante, 4 Mic and Line Inputs, 1U
Brand: Dynacord

The Dynacord IX60:4 is a 4-channel networked DSP amplifier in 1U with 6000W of total power, rated at 4x 1500W into 4 ohms or 70V/100V lines. Built-in Dante, a 12 x 12 DSP matrix with FIR-Drive and 4 mic/line inputs let it act as amplifier and processor in one. It suits sports venues, houses of worship, performance spaces, hotels and conference venues. 4x 1500W4 ohm, 70V, 100V8 x 8Dante4Mic/line inputs1URack height SoftwareConfiguration and control are through Dynacord SONICUE Sound System Software; the amplifier can also act as a SONICUE control server for wall panels, TPC-1 touch panels, iOS and Windows devices. FeaturesFour channels, 4x 1500W with all channels driven into 4 ohms, 70V or 100VpowerTANK sharing: a single channel can deliver up to 1800W into 4 ohms or 100V (no bridge mode)Drives low-impedance or 70V/100V loads without transformers8 x 8 Dante at 48 or 96 kHz with glitch-free redundancy (primary/secondary) or RSTP4 mic/line inputs with 48V phantom power, usable as Dante break-in points96 kHz DSP with 12 x 12 matrix mixer, EQ, dynamics, FX and FIR-Drive speaker processingPilot-tone detection on all inputs and pilot-tone generation up to 30 kHzghostPOWER: PoE on the primary port keeps DSP, Dante and mic/line inputs running without mainsTaskEngine for logic, scheduling and third-party control; AES70/OCA remote control3 GPIO ports and a ready/fault relay SpecificationsOutput power, all channels driven2 ohm: 1000W, 2.7 ohm: 1300W, 4 ohm: 1500W, 8 ohm: 1200W, 70V: 1500W, 100V: 1500WMaximum per channel4 ohm: 1800W, 100V: 1800WBridged outputNot availableTotal rated output6000WMaximum output voltage / current per channel145 Vpk / 33 ApkVoltage gain32 dB, adjustable 20 to 44 dBFrequency response20 Hz to 20 kHz (±1 dB)THD+NShow more

from £3,527.00

1 offer

See all offers