
Ecler
Ecler VIDA24Q Smart DSP Amplifier, 4 Channel, 2400W Shared, Dante and AES67, 70V and 100V, 2U
The Ecler VIDA24Q is a four-channel Class D amplifier with a total of 2400W that can be shared unevenly between outputs, giving 4x 600W with all channels driven or up to 2400W on one channel. Each output is set to 2, 4 or 8 ohms or to a 70V or 100V line, and the unit adds Dante/AES67, a DSP matrix, a microSD player and scheduling, all set from a web browser. It suits larger zoned systems in bars, hotels, retail, gyms, offices, schools and places of worship. 2400WTotal, shared4x 600WAll channels driven4 x 4Dante/AES67 I/O2URack height Power sharing2400W is the total for the unit. With all four channels driven equally each output gives 600W; a single channel can take up to 2400W into 4 ohms or at 100V. Dante/AES67 inputsEcler states that Dante/AES67 input support requires firmware v1.02 or later. FeaturesFour amplified outputs sharing 2400W through Ecler VersaPower, so power can be split unevenly between channelsEach output set independently to 2, 4 or 8 ohms, 70V or 100V4 balanced analogue inputs and 4 Dante/AES67 network inputs2 balanced auxiliary line outputs and 4 Dante/AES67 network outputsBuilt-in microSD audio player and signal generatorInternal matrix with input and output DSP: noise gate, high-pass filter, frequency shifter, compressor, delay, parametric and graphic EQ, limitersPriority and backup signal handling, presets, scheduled calendar events4 GPI (0 to 10V), 4 GPO relay contacts and external muteConfigured from the embedded web application; end-user control from iOS, Android and web appsPer-channel auto standby and low-consumption sleep mode; works with EclerCLOUD remote monitoring SpecificationsInputs4 analogue (3-pin Euroblock, balanced), 4 Dante/AES67, microSD player, signal generatorOutputs4 amplified, 2 auxiliary line (3-pin Euroblock, balanced), 4 Dante/AES67Output power, all channels driven600W per channel into 8, 4 or 2 ohms, or at 100V/70VOutput power, single channel (VersaPower)Up to 2400W into 4 ohms or at 100V; 2000W at 70V; 1600W into 2 ohms; 1400W into 8 ohmsAmplifier technologyClass DVoltage gain28 to 40 dBInput sensitivity-6 to +6 dBV (0.5 to 2 Vrms)Input impedance>24 kohmMaximum input level+18 dBV (+20.2 dBu)Frequency response15 Hz to 25 kHzTHD+N500DSP latency2.8 msNetworkGigabit Ethernet; Dante/AES67 4 Tx / 4 Rx, primary and secondary RJ-45Local storagemicroSD (SDXC) up to 2 TB; mp3, ogg, WAV, FLAC, AIFFControl I/O4x GPI (0 to 10V), 4x GPO (NO/NC), external muteMains100 to 240V AC, 50/60 Hz, IEC C14 inlet, PFC >0.96Power draw at 230V1/8 power into 4 ohms: 498W; idle: 72W; standby/sleep: 4.1WEfficiency72%CoolingFan, 53 dB maximumOperating temperature-10 to 50°CDimensions (W x H x D)482.6 x 88 x 410 mm, 2U rackWeight9.3 kgShow more
Offer
All prices incl. VAT; shipping costs per shop feed. The click takes you directly to the shop's product page.
Price history (lowest price)
Product details
- Brands
- Ecler
- Categories
- Electronics > Audio > Audio Components > Power & Headphone Amplifiers > Power Amplifiers
Similar products
Lab Gruppen CA2402 Commercial Install Amplifier, 2x240W, 4 and 8 Ohm, 70V and 100V, Fanless, Energy Star1 offerfrom £394.00
Cloud CXA2125 Digital Amplifier with DSP and Ethernet, 2 x 125W 100V or 4 x 60W Low Impedance, Half Rack 1U1 offerfrom £911.00
Linea Research 44C10 4 Channel Installation Power Amplifier, 4 x 2500W, DSP, 2U Rack1 offerfrom £4,103.00
Biamp Voltera D 2400.8 Class D Power Amplifier with DSP, 8 x 300W at 4 Ohm, 1U1 offerfrom £5,513.00
Dynacord IX60:8 Networked DSP Power Amplifier, 8 x 600W, Dante, 8 Mic and Line Inputs, 1U1 offerfrom £3,887.00
Dynacord IX30:8 Networked DSP Power Amplifier, 8 x 375W, Dante, 8 Mic and Line Inputs, 1U1 offerfrom £3,455.00