Linea Research 44C20 Dante 4 Channel Installation Power Amplifier, 4 x 3000W at 4 Ohms, DSP, 2U Rack

Name: Linea Research 44C20 Dante 4 Channel Installation Power Amplifier, 4 x 3000W at 4 Ohms, DSP, 2U Rack
Brand: Linea Research

The Linea Research 44 C20 Dante is the flagship four-channel installation amplifier in the 44C Series, delivering 3,000W per channel at 4 Ohms with integrated Dante/AES67 digital audio networking. Purpose-built for large-scale venues, arenas, performing arts centres, and high-output distributed systems, it combines exceptional power density with networked audio, 96kHz DSP, and comprehensive remote management in a 2U chassis.4Channels · Independent outputs5,000WPower per Channel · At 2 Ohms, all driven2UForm Factor · Rack mount96kHzDSP Sample Rate · Internal processingDanteAudio Network · AES67 compatibleInstallation IntegrationDesigned for permanent installation with full remote management via Linea Research SE System Engineer software over Ethernet. Third-party control systems connect via TCP/IP, RS232, or RS485. Comprehensive relay and contact closure ports allow integration with building management and fire alarm systems. The tamper-proof front panel provides status verification without exposing controls to unauthorised adjustment. Dante/AES67 networking enables audio distribution over standard IT infrastructure.FeaturesIntegrated Dante/AES67 digital audio networking for streamlined cablingAll four channels deliver rated power simultaneously without derating7-10% more efficient than competing amplifier platformsEach channel configurable for 2 or 4 Ohm loads plus 25V, 70V, and 100V constant-voltage lines96kHz DSP engine with LIR phase-linear crossovers and VX Limiters for loudspeaker protectionTamper-proof front panel for status monitoring without local control accessThird-party control via TCP/IP, RS232, and RS485 protocolsRelay and contact closure ports for building management and emergency system integrationEthernet connectivity for remote monitoring and control via SE System EngineerCompact 2U form factor maximises rack density in equipment roomsNoteThe 44 C20 can be configured to deliver its maximum power into 2 or 4 Ohm loads. It will also drive 8 Ohm loads at 1,500W per channel, the same as the 44 C6 and 44 C10.SpecificationsModel44 C20 DanteSKUZR1203 DanteChannels4Power per Channel5,000W @ 2 Ohms, 3,000W @ 4 Ohms, 1,500W @ 8 OhmsImpedance Options2 or 4 Ohms for maximum power; 8 Ohms at 1,500WConstant Voltage25V, 70V, 100VDSP Sample Rate96kHzDSP FeaturesLIR crossovers, VX LimitersAudio NetworkDante / AES67Control InterfacesTCP/IP, RS232, RS485, EthernetSoftwareSE System Engineer (PC)Form Factor2U rack mountSeriesC Series (Installation)Show more

£5,450.00

from £5,298.00

1 offer

See all offers