Keter Lighting

Keter Lighting Lars Black 1776 ceiling light, 3 × E27 max 60 W, diamond cage shades, 60 × 60 × 39 cm

Name: Keter Lighting Lars Black 1776 ceiling light, 3 × E27 max 60 W, diamond cage shades, 60 × 60 × 39 cm
Brand: Keter Lighting

Lars Black is a ceiling light with three diamond-shaped wire cage shades, set on straight arms radiating from a central cylinder. The whole measures 60 × 60 cm and stands 39 cm high — a close-to-ceiling fitting, not a pendant. A shade that hides nothing The shades are open cages of black wire, so they conceal nothing: the bulb is fully visible and the wire edges draw a sharp geometric shadow across ceiling and walls. That changes how you choose the lamp — the bulb is part of the decor here. A decorative filament in a pear or globe envelope gives the effect this structure was built for; a plain opal bulb will work electrically but will erase the filament drawing the cage was meant to display. Decorative cable arcs Between the arms and the ceiling rose run loose arcs of black cable. This is a design detail, not stray wiring: it lends lightness to a rigid symmetrical structure and places the fitting in a loft aesthetic where visible installation is part of the look. Three E27 points The fitting takes three E27 lamps of up to 60 W each. Lamps are not included. Three points spread over 60 cm is general room lighting rather than pure accent — with three LED sources of about 800 lm each you get close to 2400 lm, enough for a room of 12–16 m². Bear in mind that with an open cage nothing softens the filament glare, so for a room where you sit facing the fitting choose a lower-output or dimmable source. Specification Manufacturer symbol: 1776 (Lars Black series) Type: ceiling light, 3 light points Dimensions: length 60 cm, width 60 cm, height 39 cm Sockets: 3 × E27, maximum 60 W per point; lamps not included Voltage: 230 V Frame material: metal, black Shade material: metal, black Ingress protection: IP20 — for indoor use Gross weight: 2.15 kg Manufacture: Poland, hand assembled Where it works The low 39 cm profile lets Lars fit where a chandelier would hang too low — in a room of standard height, over a dining table open to the living room, in a bedroom. The 60 cm spread does need free space under the ceiling: this is not a fitting for a narrow hallway. The loft style pairs well with raw timber, brick and metal detailing; in a more classical interior the black cages will act as a counterpoint rather than a background. IP20 restricts it to dry rooms. The Lars family The maker also offers the same design as a five-light version and in black-and-gold, white and white-and-gold finishes, plus a two-light wall fitting. That makes it possible to match the ceiling light in the living room with a wall light in the hallway without looking to another manufacturer. About the manufacturer Keter Lighting is a Polish maker of decorative lighting. The company states that its lamps are produced in Poland and hand assembled from components certified to EU standards.Mostrar mais

desde 80,00 €

1 oferta

Ver ofertas